Kreg Edge to Festool 27mm & 36mm Dust Hose Adapter

If you’ve tried connecting a Festool dust hose directly to the Kreg Edge, you’ve probably noticed the problem. It kind of fits, but not well enough to stay put.

The hose can feel loose, work its way out while you’re using the tool, or fall off completely with a small tug or change in position. That gets frustrating fast when you’re trying to focus on making accurate mortises instead of constantly checking your dust hose connection.

The Kreg Edge to Festool Dust Hose Adapter is designed to fix that problem by creating a secure, reliable connection between the Kreg Edge Mortise & Tenon Joiner and common Festool dust extractor hoses.

Even better, you don’t need separate adapters for different Festool hose sizes.

This single adapter is designed to work with both Festool 27mm and 36mm dust hoses. The 27mm hose connects to the inside of the adapter, while the 36mm hose connects over the outside. One adapter, two hose sizes, no extra fittings required.

If you already use a Festool CT dust extractor in your shop, this makes it easy to use the same dust collection setup with your Kreg Edge without tape, improvised fittings, loose connections, or a pile of different adapters.

Each adapter is professionally 3D printed using high-quality PETG filament selected specifically for real workshop use. PETG offers an excellent combination of strength, durability, impact resistance, and temperature resistance, making it well suited to the everyday demands of a woodworking shop.

It is built to handle bumps, drops, vibration, dust, temperature changes, and the general abuse that shop accessories experience. Whether it stays connected to your hose, gets tossed in a drawer, or sees regular daily use, it is designed to withstand the demands of a real workshop.

The compact design also keeps the connection simple without adding unnecessary bulk to the back of the tool.

Compatibility:

✅ Kreg Edge Mortise & Tenon Joiner

✅ Festool 27mm dust extractor hoses, connects inside the adapter

✅ Festool 36mm dust extractor hoses, connects over the outside of the adapter

✅ Festool CT dust extractors when used with a compatible 27mm or 36mm hose

✅ One adapter works with both hose sizes, no separate adapters required

Features:

✅ Creates a more secure connection between the Kreg Edge and Festool dust hoses

✅ Helps prevent the dust hose from loosening or falling out during use

✅ Designed specifically for the Kreg Edge dust port

✅ Compatible with both Festool 27mm and 36mm dust hoses

✅ 27mm hose fits inside the adapter

✅ 36mm hose fits over the outside of the adapter

✅ One adapter handles both common Festool hose sizes

✅ Eliminates the need for tape or makeshift hose connections

✅ Compact design adds minimal bulk to the tool

✅ Quick and easy to install and remove

✅ Professionally manufactured from high-quality PETG

✅ Strong, durable, impact resistant, and built for demanding workshop use

✅ Designed for woodworkers, cabinetmakers, furniture makers, and DIY shop use

Why PETG?

Not all 3D printed parts are created equal.

This adapter is manufactured from high-quality PETG filament because it offers the durability needed for a real woodworking environment. PETG is tougher and less brittle than many common 3D printing materials, providing excellent resistance to impacts, flexing, heat, and everyday shop abuse.

That means you can use it like a real shop accessory without feeling like you need to baby it.

PLEASE NOTE: This listing is for the dust hose adapter only. The Kreg Edge, Festool dust extractor, Festool dust hose, and any other tools shown in photos are not included.

The Kreg Edge to Festool Dust Hose Adapter is a simple upgrade that solves one of the most annoying parts of using a Festool dust collection system with the Kreg Edge. No more hose that only sort of fits, and no need to buy multiple adapters. One compact adapter gives you a secure connection for both 27mm and 36mm Festool dust hoses.